Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Fireplace Repair in Dallas: What to Know First
Olympia Chimney fireplace repair in Dallas typically runs $145 to $425 depending on the job, and most repairs are completed in a single visit. We’re an independent Olympia Chimney service provider, not a manufacturer-authorized shop, which means we recommend the best fix for your fireplace rather than the one that pads a corporate warranty ticket. This page is written for Dallas homeowners with an Olympia fireplace or Olympia liner system who need straight answers about what failed, what it costs, and when it can wait. Call (361) 314-3193 and a live person answers, day or night.
How Olympia Chimney Products Fail – and How We Fix Them
We run into Olympia components inside all kinds of Dallas fireplaces, and the brand makes a solid line of stainless liners, caps, and chase covers. But every manufacturer has patterns. Here’s what we see most often on Olympia jobs around Dallas:
- Galvanized chase covers rusting through at the seam. Olympia chase covers see a lot of Dallas weather: summer UV, spring hail, and enough humidity to keep the galvanized coating working overtime. Once the seam weld fails, water follows the pipe down into the firebox. The fix is a switch to stainless or a properly sealed replacement, not another coat of roof tar.
- Stainless liner with a buckled seam after a big storm. High winds off the prairie put real flex on chimney caps and exposed liner sections. An Olympia liner that got torqued by wind will separate at the seam joint, usually just above the chase or at the flue tile transition. We cut out the damaged section and reattach with the correct gauge connector; it’s a repair, not a replacement, in most cases.
- Locking dampers that won’t set. Olympia locking dampers are a common spec on rebuilds we do. The cable linkage stretches over a few Dallas winters of open-close cycles, and the plate ends up sitting slightly cocked, letting conditioned air pour up the flue. A quick cable adjustment and we set it with a dollar-bill test to confirm the seal.
- Fireplace doors with worn refractory anchors. Olympia doors are often mounted using refractory anchors buried in the brick. When those anchors crack or the mortar behind them crumbles, the door frame pulls loose. We repoint the firebrick, reset the anchors, and align the frame so the doors close square. If we catch it early, you keep the original door set.
- Gas logs with a lazy, yellow flame. On Olympia gas setups, the most common complaint is lazy flame and soot bloom across the ceramic. Nine times out of ten it’s dust crawled into the burner ports or a spider web in the air mixer, not a broken valve. We pull the burner assembly, clean the ports, check the thermocouple millivolts, and the flame snaps back to blue at the base.
Styles & brands we work with
Our Olympia Chimney Fireplace Repair Process
Here’s how a repair job actually goes when you call us for Olympia equipment in Dallas:
- 1
You call, we talk. A live person picks up at (361) 314-3193. We ask what you’re seeing, what fuel type, and when it started. No script, no hold music.
- 2
We arrive in the window we gave you. Uniformed tech, background-checked, with the tools and test equipment already in the truck.
- 3
We diagnose with eyes and instruments. We check the firebox, damper, flue, cap, gas train, and draft. On wood burners, we run a draft test. On gas, we watch the flame and check thermocouple output.
- 4
You get the price before we touch anything. Written, itemized, with the part and the labor separated. If a repair can wait until spring, we say so and we put that in writing too.
- 5
We fix it with the right part. We use genuine Olympia components when the warranty or fit calls for it, and proven aftermarket equivalents when they’re the better buy. Parts come from the trade supply chain: DuraFlex, HeatShield, Gelco, Famco, Copperfield.
- 6
We test, we clean, we hand you the written guarantee. Every job gets the 365-Day Done Right Promise: if it fails inside the guarantee period, we come back and make it right at no charge.
What Olympia Chimney Fireplace Repair Costs in Dallas
Most Olympia fireplace repairs in Dallas fall into these ranges:
- Pilot light and thermocouple replacement: $145 – $265
- Gas valve replacement: $270 – $485
- Damper repair or replacement: $185 – $410
- Firebox mortar and refractory repair: $220 – $650 depending on damage area
- Chase cover replacement: $380 – $740 fitted
- Flue liner section repair: $500 – $1,300 depending on length and access
What moves the price: roof access difficulty in two-story Dallas homes, whether the chase is mortared and needs opening, and gas vs. wood. We give a written price before any work starts, and that’s the number that shows up on the invoice. Call (361) 314-3193 for a free estimate on your Olympia setup.
See the difference
Before
After
Before
After
Before
AfterWhy Dallas Homeowners Call Ashby Chimney Dallas for Olympia Chimney Work
Most of the people who call us have already been burned once: a technician who ghosted, a quote that doubled at the door, a liner that cracked six weeks after the “fix.” Nathan Corliss runs our Dallas crew the same way he’s run jobs for over a decade: tell you the price first, do the work right, put it in writing. That’s the whole job. Every Olympia repair carries the Kingswell Guarantee in writing, and if the repair fails inside the guarantee period, we return at no charge. Free second visit, no fine print. It’s also not hard to source Olympia-compatible parts in Dallas, and when Olympia isn’t the best choice, we carry the stuff that is: DuraFlex liners, HeatShield resurfacing, Gelco caps.
FAQs
We can repair it, but we’re an independent Olympia Chimney service provider, not an authorized warranty shop. If your unit is still under manufacturer warranty, we’ll tell you honestly whether the part is likely covered and whether it makes more sense for you to file a warranty claim first. We won’t do a repair that quietly voids a warranty you could have used. Call (361) 314-3193 and we’ll help you figure out where you stand.
Both, and we’ll tell you which we’re quoting and why. Genuine Olympia parts go in when the fit or warranty demands it; in Dallas, it’s often faster and cheaper to use a proven aftermarket equivalent from a brand like DuraFlex or Copperfield without any loss of function. The written price shows exactly what part you’re paying for.
We book by arrival window rather than exact hour, and a live person answers at (361) 314-3193 around the clock to get you scheduled. Gas fireplaces with pilot or valve issues move faster because there’s less diagnostics; flue liner work can take a second visit depending on equipment and weather. We’ll give you the window when we talk, and we keep it.
On a gas fireplace, the damper not closing is mostly an energy problem: warm Dallas air escapes up the flue all summer. On a wood burner, it’s also a draft problem that can pull smoke back into the room. The bigger safety concern is using a wood-burning fireplace with visible firebox damage or a liner you haven’t inspected recently. If you’re unsure, call us for a chimney inspection. We’ll show you photos from the flue camera before we recommend anything.
When the repair is under about half the cost of replacement and the firebox is structurally sound, we’ll tell you to fix it. When the box is crumbling or the liner system has reached the end of its life, pushing a repair is throwing good money after bad. We’ll show you the camera evidence either way, quote both paths, and let you decide without pressure. Call (361) 314-3193 for an honest assessment.
Get Your Olympia Chimney Fireplace Fixed Right
If your Olympia fireplace in Dallas is acting up, call (361) 314-3193. We’ll answer day or night, quote the price before we start, and put the guarantee in writing. Nathan Corliss has been running chimney crews in the Dallas area for well over a decade, including plenty of Lakewood homes with flues that hadn’t been touched since the Clinton administration. We’ll tell you the price first. We’ll do the work right. And we’ll put it in writing. That’s the whole job.
Written by Nathan Corliss, Owner, Ashby Chimney Dallas at Ashby Chimney Dallas, serving Dallas and nearby areas.