Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Mesquite
A chimney sweep in Mesquite, TX typically costs between $189 and $340 depending on the chimney type, creosote level, and any repairs needed along the way. We schedule sweeps across Mesquite within 3 to 5 business days during peak season, and we show up with a written price before any work starts. If you live in a brick ranch home off Galloway Avenue or a two-story off Cartwright Road, you’re dealing with the same thing we see all over Mesquite: factory-built chimneys from the 1970s through 1990s that need specific attention, not just a brush shoved up the flue. Call (361) 314-3193 and you’ll get a live person, not a voicemail loop.
Why Ashby Chimney Dallas Is Mesquite’s Preferred Chimney Sweep Company
Our techs know the difference between a masonry chimney in an Original Mesquite home from the 1950s and a factory-built metal flue in a Creek Crossing house from 1994. That matters because they get cleaned and inspected differently. We’re part of the Kingswell network of independently owned chimney companies, operating under the Kingswell Guarantee since 2002, and every Mesquite job gets the same treatment: a written price before work starts, a written guarantee when the job is done, and a call answered by a real person when you ring us.
Homeowners around Town East Mall and the Poteet High School area call us because a previous chimney company either never showed or doubled the price at the door. We don’t do that. The number we quote is the number on your invoice. If a covered repair fails within the guarantee period, we return at no charge and make it right. That’s the 365-Day Done Right Promise, and it applies to every sweep, inspection, and repair we perform in Mesquite.
Styles & brands we work with
Chimney Maintenance in Mesquite
Chimney Maintenance in Mesquite means more than an annual sweeping for most homes here. Our crews focus on what actually fails in this city: chase covers on factory-built chimneys, flashing around the roofline, and the thin metal liners inside prefab flues that nobody sees until water starts staining the brick. A maintenance visit includes a sweep, a visual check of the cap and chase, and a written note on anything that looks like it’s approaching failure before the next cold snap. Most Mesquite maintenance visits run $189 to $275.
Annual Sweep and Creosote Removal
Every fireplace in Mesquite builds creosote, even the ones used only a few times a year. East Texas humidity mixes with wood smoke and leaves a glaze inside flue liners that you won’t see from the firebox. We remove first, second, and third-degree creosote using brushes sized to your specific flue, whether it’s round, square, or rectangular.
Chase Cover and Cap Inspection
On factory-built chimneys, the chase cover is the flat metal lid on top of the wooden or metal box surrounding your flue. In Mesquite, spring hail and thunderstorms beat these covers until they rust through, and once water gets in, it tracks down inside the chase and starts spalling the brick veneer below the roofline. We check the chase cover on every maintenance visit and tell you plainly if it can wait or if it needs replacing now.
Chimney Sweep Services in Mesquite
Chimney Sweep Services in Mesquite cover the full sweep itself: removing soot, creosote, and any debris from the flue, smoke shelf, damper, and firebox. Our crews handle both masonry chimneys and factory-built metal flues, and we use the right brush for each. A standard sweep in Mesquite runs $189 to $240. If your fireplace hasn’t been swept in years or you’ve been burning pine from east Texas, the price can reach $340 when heavy creosote removal takes extra time and material. We tell you the price before the brush touches your flue.
Level 1 and Level 2 Inspection
A Level 1 inspection comes with every sweep and covers the accessible parts of the chimney. A Level 2 inspection goes further with camera equipment to look inside the flue liner, and we recommend it after any hailstorm, after a chimney fire, or before buying a home in Mesquite. Level 2 inspections run $150 to $300 depending on the chimney type, and if we find damage, you get a photo report so you can see exactly what we saw.
Fireplace Cleaning and Soot Removal
The firebox gets dirty fast, especially in Mesquite homes where fireplaces run nightly through a January cold snap. We clean out ash, remove soot from the walls and floor, and check the damper for warping or sticking. Cracked refractory panels are common in 1980s and 1990s factory-built fireplaces, and we’ll flag them with photos and a repair price if they need attention.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mesquite
We stock parts for the chimney brands most common across Mesquite, including Olympia Chimney caps and chase covers, Gelco flashings, and HeatShield liner repair systems. When a Mesquite homeowner needs a new chase cover after a storm, we can often source and install it the same week without waiting on a slow shipment. If your factory-built fireplace has a manufacturer-specific part, we’ll match it rather than forcing a generic piece that doesn’t fit right. For older prefab units, we use Famco components when the original manufacturer is no longer in business, because a chimney built in 1987 still has to vent safely in 2026.
Common Chimney Sweep Problems We See in Mesquite Homes
- Rusted chase covers after hailstorms. Mesquite sits in a hail corridor, and spring storms regularly beat the metal covers on factory-built chimneys. Once rust opens a hole, water gets inside the chase and starts damaging the flue and the brick below.
- Glazed third-degree creosote in rarely swept prefab flues. A fireplace that looks clean from the firebox can still have a hard, shiny creosote glaze coating the flue liner. This is the number one cause of chimney fires we prevent in Mesquite homes.
- Damaged liners from using the wrong brush. Factory-built chimneys often have rectangular flue liners made of thin metal. A round brush forced through a rectangular flue can tear the liner, and that’s a repair you should never have to pay for.
- Water staining below the roofline on brick ranches. In neighborhoods like Original Mesquite, rust streaks on the brick under the chimney usually mean water is running down the outside of the flue from a failed chase cover or damaged flashing.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Mesquite, TX
A standard chimney sweep in Mesquite, TX runs $189 to $240 for a one-story home with a masonry or factory-built flue and light to moderate creosote. Two-story homes of the kind you find along Oates Drive or in the Palos Verdes area run $220 to $280 because of the extra height and time on the roof. Heavy creosote removal adds $50 to $100 depending on how thick the glaze is. A Level 2 camera inspection runs $150 to $300. Every quote is written and fixed before we start, so the number on the door is the number on the invoice. Call (361) 314-3193 for an exact quote – estimates are free.
We Also Serve Cities Near Mesquite
Our crews cover Mesquite and the surrounding communities, including Rowlett, Hutchins, Dallas, and Sachse. If you’re just outside Mesquite in one of those areas, we can schedule a sweep and inspection with the same written pricing and the same guarantee we offer here. Learn more about our full Chimney Sweep services, or see how we serve the wider Chimney Sweep in Mesquite area.
Serving Mesquite, TX - Our Local Coverage Area
We’re based in the Mesquite area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Mesquite
Even a few fires a year produce creosote, and in a factory-built chimney from the 1990s, that creosote can build up faster than in a masonry flue because the metal liner is thinner and cools quickly, causing vapor to condense as a sticky glaze. In Mesquite’s humid climate, that creosote absorbs moisture and hardens. We recommend an annual sweep regardless of burn frequency, and we’ll verify the liner condition with a camera if you haven’t had an inspection in the last three years. Call (361) 314-3193 and we’ll give you a written quote over the phone.
Rust streaks below the chimney on a Mesquite brick ranch usually mean your chase cover has rusted through and water is running down the outside of the metal flue, then staining the brick as it exits. We see this most often in Original Mesquite and other east-side neighborhoods after spring storms. The fix is a new galvanized chase cover and cap, typically $350 to $600 installed. In one Original Mesquite home, our crew found exactly this after a spring hailstorm: the chase cover had rusted through, water was running down the factory-built flue, and we replaced the assembly with an Olympia Chimney galvanized cover and cap, then ran a Level 2 inspection to confirm no creosote or hidden water damage inside the liner. Call (361) 314-3193 and we’ll come take a look.
No. Factory-built metal chimneys in Mesquite homes from the 1970s through the 1990s have rectangular or round flues made of thin metal, and using the wrong brush can tear the liner and void the manufacturer’s warranty. Our crews carry multiple brush shapes and sizes, and we match the brush to your exact flue dimensions before anyone goes on the roof. That’s standard practice for every sweep we do in Mesquite, whether it’s a masonry flue in a 1950s Original Mesquite home or a prefab flue in a 1990s Creek Crossing build.
Shiny black tar is not normal. That’s third-degree creosote, which is a hardened glaze that forms when smoke cools quickly inside a flue that isn’t drafting well, and it’s highly combustible. It usually indicates either burning unseasoned wood or insufficient flue temperature, and in Mesquite’s humid fall weather, both are common. We’ll remove it with specialized creosote treatment and mechanical brushing, and then we’ll check the flue for damage with a camera. You should not burn another fire until it’s removed. Call (361) 314-3193 to schedule a sweep.
You need a sweep plus a repair evaluation. A stuck damper often means warped metal from heat exposure, and cracked refractory panels in a factory-built fireplace are a sign the unit has been run hotter than it was designed for. We’ll sweep the flue to remove any creosote, then assess the damper and panels with photos so you can see the condition for yourself. Cracked panels usually need replacement before the fireplace is used again, and a warped damper that won’t seal properly wastes heat and can pull cold air into the house when the fireplace isn’t running. We’ll give you a written price for the repair before any work proceeds.
Call Ashby Chimney Dallas for Your Mesquite Chimney Sweep
If you live in Mesquite and your chimney hasn’t been swept in the last year, or you’ve seen rust streaks, water stains, or a stuck damper, give us a call. Nathan Corliss runs this operation with a simple rule: show up when we say, quote the price in writing before any work starts, and stand behind the repair with a written guarantee. That’s the Kingswell Way, and it’s how we’ve operated since 2002. Call (361) 314-3193 for a free estimate, and you’ll get a live person who can schedule your sweep and answer your questions the same day.
Written by Nathan Corliss, Owner at Ashby Chimney Dallas, serving Mesquite and the surrounding area under the Kingswell Guarantee.