Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Mesquite
Most fireplace repairs in Mesquite run between $180 and $1,400 depending on what’s actually wrong, and we’ll give you the exact number in writing before any work begins. If you’re in Mesquite and your gas fireplace won’t light, your damper is stuck, or you’ve spotted water stains spreading below the chimney chase on your 1980s brick ranch, call (361) 314-3193 and a live person answers, 24/7. We’ve worked on hundreds of the factory-built fireplaces and prefab metal chimneys that dominate Mesquite’s housing stock, so we know what fails on them, why it fails, and what it costs to put right.
Our Fireplace Repair team covers every Mesquite neighborhood, from Original Mesquite east to Creek Crossing and north past Town East Boulevard. The call is free. The estimate is free. And you’ll know the real price before a single tool comes off the truck.
Why Ashby Chimney Dallas Is Mesquite’s Preferred Fireplace Repair Company
Our founder Nathan Corliss built Ashby Chimney Dallas around a simple idea: a homeowner should never feel like they were ambushed by a repair bill. That’s why every visit to a Mesquite home starts with a written price, and every repair ends with a written guarantee. No verbal estimates, no “we’ll see what we find.” You get the number first.
Mesquite homeowners have dealt with enough no-shows and price-switching contractors. We’re the opposite. When we schedule a visit to a home off Galloway Avenue or near Paschall Park, we show up in a real arrival window, we’re in uniform, and we’ve been background-checked. Our technicians carry parts for the brands Mesquite homes use most: HeatShield, Gelco, and Famco among them. That means fewer return trips and faster repairs when your fireplace is down in the middle of a cold snap.
We’re independently owned and operated under the Kingswell Guarantee, and we’ve been in business since 2002. The guarantee covers every repair we make in Mesquite for a full year. If a covered repair fails inside that window, we come back and fix it at no charge. That’s the 365-Day Done Right Promise, and we put it in writing on every job, no exceptions.
Styles & brands we work with
Wood Stove Installation in Mesquite
Wood stove installation in Mesquite is one of the deeper projects we take on, and it usually runs between $1,800 and $4,200 here, depending on the venting route, the stove’s clearance requirements, and whether the existing prefab chimney can accept a new stainless liner. That 1970s brick ranch off Belt Line Road likely has an old factory-built fireplace that was never designed for the sustained heat a modern wood stove puts out. Installing a stove means evaluating that original chimney honestly, sometimes lining it with a properly sized stainless system, and always pulling a permit through the City of Mesquite.
What the Job Actually Involves
We start with a camera inspection of the existing flue. If the clay tiles are cracked or the metal chimney has rust-through from a failed chase cover, a direct vent wood stove or a new liner may be the safer, cleaner route. We never recommend a liner or a rebuild without showing you the camera footage. If the chimney is sound, we proceed with the hearth pad, clearance distances, and the stove pipe connection, all finished to the manufacturer’s spec and Mesquite code.
Why Wood Stoves Make Sense in Older Mesquite Homes
Many Mesquite homeowners use a wood stove as their main heat source during the sharp cold snaps that hit in January and February. A properly sized, well-installed stove burns hotter and more completely than an open fireplace, which cuts creosote loading in the flue. But that only holds if the installation is right. We’ve pulled too many undersized stove pipes out of 1990s two-stories in Creek Crossing to assume anything until we’ve looked.
Gas Fireplace Repair in Mesquite
Gas fireplace repair in Mesquite typically runs $160 to $680 for the common fixes: cleaning the pilot assembly, replacing a thermocouple or thermopile, or swapping a gas valve. If the firebox refractory panels are cracked or the burner itself has corroded from years of use in a brick ranch on the east side, the number climbs, but you’ll know the full price before we touch a connection. Most gas fireplace repairs in Mesquite are single-visit jobs.
Pilot Light and Ignition Repairs
A pilot light that won’t stay lit is nearly always a thermopile or thermocouple issue, and that’s a straightforward repair we can usually do the same day we diagnose it. In Mesquite’s older gas fireplaces, we also see mineral deposits from the local water supply causing pilot orifice blockages. That’s a cleaning and a replacement, not a reason to sell you a new unit.
Burner, Valve, and Refractory Panel Work
The gas logs and refractory panels in a 1980s fireplace degrade with heat and humidity cycles. If you hear a thumping or roaring sound when the fireplace is on, or you smell a metallic odor, the burner ports may be clogged or the valve may be failing. These are specific diagnoses, and we’ll show you the failed component in person. We repair far more than we replace.
Trusted Brands We Service in Mesquite
We work on the brands that show up in Mesquite homes, and we carry parts for the most common ones so you’re not waiting a week for a box to arrive. That includes chimney and venting systems from HeatShield and Famco, sealants and cement from Gelco, and a number of factory-built fireplace brands common in 1970s through early 2000s construction. If your Mesquite home has a prefab metal chimney with a chase cover that needs replacing, we’ll likely install a Galvalume unit from Famco right from the truck. No ordering, no second trip, no delay when a gas fireplace or wood stove is your primary heat.
Common Fireplace Repair Problems We See in Mesquite Homes
- Rusted chase covers on 1980s prefab chimneys. The metal chase top rusts through after years of Mesquite thunderstorms and hail. Water seeps down around the flue, mixes with creosote, and accelerates the formation of sticky, corrosive buildup inside the chimney.
- Storm-damaged caps and flashing. A spring hailstorm can dent a chimney cap or crack flashing without you noticing. The first sign is usually a brown water stain spreading on the brick below the roofline, and by then the water has been working for weeks.
- Heavy creosote loading from short, intense burn seasons. Mesquite winters are mild most of the time, but when a cold snap hits, fireplaces and wood stoves run flat out for days or weeks. First-degree creosote builds fast in that compressed window, faster than most homeowners expect.
- Failed damper assemblies in older brick ranch fireplaces. The original throat dampers in many 1970s-1980s Mesquite homes have warped or seized. A damper that won’t close lets conditioned air leak up the chimney all summer, and one that won’t open turns a fireplace into a smoke machine.
See the difference
Before
After
Before
After
Before
AfterPricing for Fireplace Repair in Mesquite, TX
Here are honest numbers for the Mesquite market. A damper repair or replacement runs $180 to $410. A gas valve replacement typically sits between $310 and $560. Refractory panel replacement for a standard gas fireplace runs $240 to $520 per panel. A full wood stove installation, including liner and termination cap, lands between $1,800 and $4,200. Rusted chase cover replacement on a prefab chimney runs $350 to $800 depending on the size of the chase and whether the flashing needs resealing too. Every quote is written, every price is final before work starts, and every estimate is free. Call (361) 314-3193 and we’ll get you scheduled.
We Also Serve Cities Near Mesquite
While this page is written for Mesquite homeowners, our crews also handle Fireplace Repair in Mesquite and the surrounding communities. If you’re in Rowlett, Hutchins, Dallas, or Sachse and need a chimney sweep, an inspection, or a fireplace repair, we’ll come to you. Same written pricing, same guarantee, same live phone answer. Call (361) 314-3193 and tell us what’s going on with your fireplace.
Serving Mesquite, TX - Our Local Coverage Area
We’re based in the Mesquite area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Fireplace Repair in Mesquite
Every year, and the reason is specific to how Mesquite burns. When you only burn during sharp cold snaps, a season’s worth of creosote gets deposited in a matter of weeks, often while the chimney is cold and the wood is not fully seasoned. That produces a fast layer of first-degree creosote that can progress to a denser grade in one winter. An annual inspection catches it before it becomes a fire hazard, and our camera inspection is included with every visit. If you’re overdue, call (361) 314-3193 and we’ll get you on the schedule.
The most likely cause is a rusted-through chase cover or cracked flashing at the chimney top, which is extremely common on the 1980s prefab metal chimneys found throughout Original Mesquite and similar east-side neighborhoods. Hail from a spring storm dents or cracks the metal, and rainwater then runs down inside the chase, mixing with creosote and creating a corrosive slurry that stains the brick and rusts the flue liner. We pulled a rusted chase cover off a two-story brick ranch in Original Mesquite after a spring hailstorm and found exactly that: first-degree creosote on the flue liner already turning sticky from the water dripping through the smoke chamber. Our tech replaced the cover with a Galvalume unit from Famco, resealed the flashing, and rehabbed the firebox before the next freeze-thaw cycle spalled any more brick. Call (361) 314-3193 for a camera inspection and we’ll show you exactly where the water is getting in.
Yes, and this is one of the strongest reasons Mesquite homeowners in older ranch homes make the switch. A modern wood stove burns at a higher temperature and with more complete combustion than an open fireplace, which means less unburned material leaving the firebox and less creosote condensing on the flue walls. In a 1970s brick ranch with an original factory-built fireplace, the open hearth was designed for occasional ambience, not as a reliable heat source. A properly sized wood stove changes that math, but only if the existing chimney is evaluated for compatibility and lined if needed. Call (361) 314-3193 and we’ll give you a written quote for what your specific chimney needs.
Third-degree creosote is that hard, glossy, tarlike glaze that forms when heavy creosote deposits undergo repeated heating and cooling cycles without being cleaned. It’s dangerous because it burns extremely hot and is difficult to remove without professional chemical treatment or mechanical removal. In Mesquite prefab metal chimneys, it forms because those systems cool quickly between fires, condensing the smoke gases into a dense layer. Add a rusted chase cover letting moisture into the flue, and you get the perfect conditions for a glaze that a standard wire brush won’t touch. If you see a shiny black coating inside your chimney or notice a harsh, acrid smell when the fireplace is running, call (361) 314-3193 for an inspection.
Usually yes, and the reason is that your gas fireplace vents through the same flue system as any other appliance in the home. A Level 2 inspection includes a camera evaluation of the interior of the chimney, the connections, and the accessible portions of the chase. In an older Mesquite home with a 1980s prefab chimney, that camera often reveals rust, gaps in the liner joints, or water intrusion that a surface-level look would miss. We won’t recommend a gas valve replacement if the real issue is a corroded flue that’s dumping moisture back into the firebox. The camera doesn’t lie, and we’ll show you everything we see before quoting a repair. Call (361) 314-3193 for a free estimate.
What Actually Happens If You Put Off a Needed Fireplace Repair in Mesquite
Water intrusion from a failed chase cover or cracked flashing doesn’t just stain your brick. It drips down through the smoke chamber and mixes with creosote, creating an acidic slurry that eats through metal flue liners and compromises the mortar joints behind the firebox. Freeze-thaw cycles in Mesquite winters then expand any tiny cracks that water has found, and a $400 chase cover repair becomes a $2,800 liner and firebox rehabilitation. We’d rather tell you honestly that a repair can wait until spring than let a small problem sit until it’s structural. But if water is already showing on your interior walls below the roofline, don’t wait. Call (361) 314-3193 and we’ll put eyes on it, camera-based, for free.
Written by Nathan Corliss, Owner at Ashby Chimney Dallas, serving Mesquite and the surrounding DFW area since 2002.