Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Rowlett
Most chimney sweeps in Rowlett run between $189 and $329, and we’ll give you a written price before any work starts, no exceptions. That number covers the full sweep of one fireplace or stove flue, including the firebox, smoke chamber, and damper assembly. We serve Rowlett homes from the lakefront streets near Dalrock Road to the newer subdivisions off Chiesa Road and Miller Road, and we answer the phone live, 24 hours a day. Rowlett has a specific problem most other Dallas suburbs don’t: those 1990s-era prefab chimneys whose metal chase tops quietly rust out from Lake Ray Hubbard humidity, and we know exactly what to look for. Call (361) 314-3193 and we’ll get you on the schedule before burning season hits.
Why Ashby Chimney Dallas Is Rowlett’s Preferred Chimney Sweep Company
Rowlett homeowners call us because we do something simple that a lot of sweep companies won’t: we put the price in writing before the work begins, we show up when we said we would, and we put the guarantee in writing when the job is done. Nathan Corliss leads our team, and he built this company on a straightforward idea, show your work, say the price, and come back if something fails. That’s the Kingswell Way, and it’s why we’ve been doing this since 2002.
Every technician who walks into a Rowlett home is background-checked, uniformed, and trained to explain what they’re seeing in plain English. We don’t upsell mysterious “tune-ups” you don’t need. If your chase top is rusted through, we’ll show you the photo before we recommend a replacement. If your flue has first-degree creosote that a standard brush removes easily, that’s what we’ll do and nothing more. If a covered repair fails within the guarantee period, we return and correct it at no charge under our 365-Day Done Right Promise. That promise is written on every job, not sold as an add-on.
Styles & brands we work with
Gas Fireplace Cleaning in Rowlett
Gas Fireplace Cleaning in Rowlett is a service that surprises homeowners, because most people assume a gas fireplace never needs sweeping. The reality is that gas logs produce acidic soot that clings to the flue walls, and the prefab chimney systems in Rowlett’s 1990s-2000s homes trap that residue in places a casual glance won’t catch. We remove the glass front, vacuum the burner pan, clean the logs, check the pilot and thermocouple, and sweep the flue. In Rowlett, most gas fireplace cleanings run between $189 and $249, and most jobs finish in under two hours.
What We Check on Direct-Vent and Ventless Units
Prefab gas fireplaces in Rowlett have chase tops, caps, and termination screens that fail from lake-driven moisture. We check every one of those components on a gas fireplace cleaning and flag any rust or corrosion we find before it becomes a ceiling stain.
When Gas Fireplace Cleaning Isn’t Enough
Sometimes the flue on a gas log set hasn’t been opened in a decade, and the creosote from earlier wood use has hardened into second-degree glaze. We’ll tell you plainly if a cleaning is all you need, or if the flue needs more aggressive creosote removal before next season.
Chimney Maintenance in Rowlett
Chimney Maintenance in Rowlett needs to happen on a schedule, not just when something looks wrong, because the biggest problems here develop invisibly. Humid summers and irregular winter use mean Rowlett flues sit idle for months at a time, and that’s exactly when creosote hardens, chase tops rust, and masonry spalls. A maintenance visit runs between $129 and $199 and includes a flue evaluation, chimney cap check, crown inspection, and a full sweep of the accessible firebox and smoke chamber. For larger Rowlett properties with multiple fireplaces, wood stoves, and architectural masonry, we recommend an annual maintenance schedule that matches how each appliance gets used.
Why Larger Rowlett Properties Need a Different Maintenance Plan
If you own a two-story home off Dalrock Road or a lakefront property near Waterview, you might have a gas fireplace in the primary bedroom, a wood-burning unit in the living room, and an outdoor chimney by the patio. Each flue ages differently depending on fuel type, exposure, and how often it runs. We’ll write a maintenance plan that treats them as separate systems, not one generic “annual sweep.”
The Inspection Piece Most Sweeps Skip
A proper maintenance visit should include a Level 1 inspection as the baseline, which most sweeps in Rowlett do perform, but we also pay attention to the chase top, the flashing, and the crown, because those three things cause more Rowlett leaks than the flue itself. If we see spalling brick or a rusted chase top, you’ll get photos and a written recommendation, not a vague warning.
Trusted Brands We Service in Rowlett
The chimney systems in Rowlett’s homes include a lot of prefabricated metal flues and factory-built fireplaces, and that means parts compatibility matters. We stock and install components from DuraFlex and Olympia Chimney, and we use HeatShield cerification material when a flue needs resurfacing instead of a full liner replacement. When a Rowlett chase top fails, we replace it with a stainless unit sized to the existing chase, not a universal cap that “almost fits.” Same goes for chimney caps, dampers, and flashing: we’d rather order the correct part and return than install something that leaks in three years.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Rowlett Homes
- Rusted chase tops on 1990s-2000s prefab chimneys. Lake Ray Hubbard humidity eats through the galvanized metal tops on wood chase frames. Homeowners often mistake the resulting ceiling stains for roof leaks and spend thousands chasing the wrong problem.
- Hardened second-degree creosote from irregular burning. Rowlett winters aren’t consistently cold, so fireplaces get used a few times in December, then sit until March. That stop-start pattern lets first-degree creosote cure into a glaze that standard brushes can’t remove.
- Spalling brick on older lakefront masonry chimneys. Custom homes near the water have brick and stone fireplaces exposed to constant humidity and wind. Annual inspection is the only way to catch mortar deterioration before it becomes a structural repair.
- Gas log sets that haven’t been cleaned since installation. Many Rowlett homeowners bought a gas insert for convenience and never considered that it still produces acidic soot. That soot corrodes flue walls and burner components over time.
Pricing for Chimney Sweep in Rowlett, TX
We Also Serve Cities Near Rowlett
Our crews cover the east Dallas suburbs, and we’re often in the same neighborhoods our Rowlett customers ask about when they refer us to friends and family. We regularly run Chimney Sweep routes through Sachse, Mesquite, Plano, and Dallas, and we schedule those visits the same way we do in Rowlett: written price, real arrival window, written guarantee. If you’re a Rowlett homeowner with a parent in Mesquite or a friend in Sachse who needs a sweep, we’ll make it easy to book both.
Serving Rowlett, TX - Our Local Coverage Area
We’re based in the Rowlett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Rowlett
The leak usually isn’t the flashing at all. On hundreds of Rowlett homes built between the mid-1990s and late 2000s, the chimney is actually a prefabricated metal flue enclosed in a wood chase frame, and the metal chase top at the top of that wood box rusts through from Lake Ray Hubbard humidity. Water gets inside the chase, runs down through the wall cavity, and shows up as a ceiling stain two floors down. You can check this yourself if you’re comfortable on a ladder: look for rust staining or visible holes in the metal plate at the top of the chimney chase. Call (361) 314-3193 and we’ll come out, confirm what’s failing, and give you a written price to fix it.
Yes. Gas fireplaces in Rowlett need sweeping, typically every one to two years, because gas logs produce acidic soot that corrodes flue walls and burner components even when the fire looks clean. The prefabricated chimney systems on most Rowlett homes also trap that soot in horizontal runs and termination sections where it’s hard to see without a camera. We clean gas fireplace flues as a standard part of our Chimney Sweep in Rowlett service and check the pilot, thermocouple, glass seal, and chase top while we’re in there. If your gas fireplace hasn’t been cleaned since you bought the house, call (361) 314-3193 and we’ll get it done before burning season.
The tools and the risk profile are completely different. Masonry chimneys, which you find on older and custom lakefront homes in Rowlett, use round brushes sized to the flue and sometimes rotary cleaning for glazed creosote. Prefab metal chimneys, which cover most Rowlett homes built after 1990, require lighter pressure and careful brush selection because the flue is thin steel, not thick clay tile. We also inspect the chase top, cap, and termination screen on every prefab chimney, because those rust-prone components don’t exist on a masonry chimney. Call (361) 314-3193 with your address and we’ll tell you which system you have before we arrive.
Once a year, even if you only burn a few fires each December. The problem in Rowlett isn’t how much creosote you build up, it’s what happens to the chimney components while the fireplace sits idle. Chase tops rust, mortar spalls, dampers seize, and the creosote you did create has time to cure into a harder form that’s more difficult to remove. A yearly inspection catches those failures when they’re cheap to fix. Call (361) 314-3193 and ask for a Level 1 inspection with your annual sweep, written price included.
Usually not, and if a sweep tells you otherwise, ask to see the camera footage. Third-degree creosote is a hard, glossy, baked-on layer that standard brushes can’t remove, and attempting to does more damage than good to the flue liner. In many Rowlett prefab systems, third-degree creosote means the flue has reached the end of its service life, and the safe fix is a liner replacement or a HeatShield resurfacing, which we do with ceramic material backed by our written warranty. We’ll show you the camera evidence first, quote both options in writing, and never recommend a liner you don’t need. Call (361) 314-3193 for an inspection.
Written by Nathan Corliss, Owner at Ashby Chimney Dallas, serving Rowlett and the east Dallas suburbs since 2002.